How do I unclog my toilet bowl on my own?

Did the basin clog? If you find yourself in a difficult position and your toilet is clogged (apofraxeis Antoniou), don’t be disappointed. Unclogging the toilet bowl is not easy. But there are ways to deal with the problem without much effort.

Before you trust a chemical to flush out your toilet bowl, it’s a good idea to try the following ways first. The reason; Chemicals can damage the tubes in your pipe system. If this happens, it will create a bigger problem that you will have to deal with. 

If your drains are clogged, we suggest simple techniques, using materials that you already have in your home. If your basin is clogged, and you have been asked the question “how do I unclog my toilet bowl on my own?”, This article is for you. Below we have compiled the most successful ways to unclog a basin, according to the professional plumbers – Αποφράξεις Αντωνίου Αθήνα – of the genre! 

1 Basin cover with hot water

The most common and successful piece of advice for those who have sunken their toilet is hot water. Before you do anything, it’s a good idea to stop the water supply in the basin. After your toilet is clogged, there is a risk of overflowing. Once you prevent this from happening, you can proceed with the process. Take a saucepan, fill it with water, and heat it until it evaporates. When the water is ready, pour it into the basin. You let it work for a few minutes and you will notice that your problem is slowly receding. Now the basin is ready for use!

2 Use liquid dishwashing detergent

Another way to rinse your toilet is to use liquid detergent. The specific way to rinse your toilet is combined with the first tip. You use hot water the way we showed you and pour 1 cup of dishwashing detergent. Leave it on for a few minutes. Then you pull out the cistern and the problem is solved!

3 Using a wire or hanger

It may seem strange to you to think, “But how do I unplug the toilet bowl using a hanger?” And yet we will prove to you how it is done and how it is a successful way to do it. The process is simple. Take a wire hanger and open it. Create a hook on the edge and immerse it in your clogged toilet. Use the hook in such a way as to remove anything that obstructs the basin.

Caution! The movements need to be done very carefully, so as not to injure the pipes.

4  Soda mixture with vinegar

Combining soda with vinegar can also help clear your toilet. For this step, first, pour plenty of water into the basin. Then, pour a cup full of baking soda. Leave it on for 5 minutes and add a cup of vinegar. At this point your mixture should act for another 10 minutes, so that you have the desired result. S with a pot of hot water and pour it into the trough. The last step will help any residue blocking the piping of the basin to leave.

5 Use of suction cup

The latter solution is the least common in cases where the toilet is clogged. That is why it is used after all the others have failed. Using a suction cup requires good handling to succeed. Also do not forget to dedicate the appropriate time to disinfect the suction cup from the sewage, after using it.

How do I unplug the toilet bowl using a suction cup? The steps of the process are as follows:

  • After applying the suction cup well to the toilet, make quick regression movements downwards. In this way, a vacuum is created between the suction cup and the clogged basin and it will start to unblock from objects that have blocked it.
  • Continue the process until you hear the water running inside the pipes. At this point you can remove the suction cup and disinfect it well before storing it. 

6 Using a Plunger

Start by putting on some rubber gloves, and placing a few rags or newspaper on the floor around the toilet. Sometimes this can be messy. Lift the seat and place the plunger into the toilet.

Make sure there is enough water in the toilet bowl to cover the head of the plunger. If there is not enough water in the bowl, carefully remove the tank lid from the toilet, reach inside the tank and gently pull the flapper up to allow enough water into the bowl to cover the plunger.

We recommend this method, versus flushing the toilet again, because you can control the amount of water going into the bowl. If you flush a toilet while clogged, you run the risk of overflowing the toilet, creating a much larger mess then you’d care to deal with. 

If there is too much water in the toilet you risk splashing yourself, or spilling it onto the floor. Empty some of the water into a bucket. Let the air out of the plunger by tipping the head of the plunger towards the water surface. You will see a couple of big bubbles come out of the plunger. It is important to make sure you are pushing and pulling with water, not air.

Put the plunger in place, and make sure it covers the drain opening. This is necessary to create a seal. Then slowly and gently push the plunger in all the way. Use a series of short pushes until it is pushed in all the way. Then quickly pull up.Use a series of gentle pushes and pulls, with the emphasis on pulling, to create a sort of rocking effect will help move the obstruction. Repeat these steps a few times until the toilet begins to drain.

If you needed to empty some of the water into a bucket, once the toilet has drained, empty the contents of the bucket into the toilet and flush. Clean the items you used and gloves with your disinfectant of choice. It’s not a bad idea to take all of your tools outside and spray them off (away from children).

If the problem won’t go away

We hope we have helped you answer your question “how do I unplug the toilet bowl?” In case the problem is not solved in any of the above ways do not insist any more! The problem may not be that your toilet is clogged – Αποφράξεις Καλλιθέας . The problem you are facing may be in the pipes and you may make it worse if you continue to try to block yourself.

Read more about plumping tips: